
Hand signaling is a risky move when you are snowmobiling as a group and need to communicate directions with other members. Or even if you are trying to catch the attention of incoming traffic on a busy trail. Attempting to maneuver your sled with one hand is a dangerous gamble on winter terrains, combined with scattered focus and a high chance of split-second accidents. If you are in a rush here are a few of our favorite snowmobile signal lights:
Image | Title | Why We Like | Rating | |
---|---|---|---|---|
![]() | Ridelite Signal System | Best Overall Signal System | ![]() | Check Price on ebay |
![]() | PowerMadd Black LED Light Kit for Sentinel Handguards | Best Glove Guard Signal | ![]() | Check Price on Amazon |
![]() | Partsam 2 x 4.5 inch Snowmobile LED Stop Turn Signal | Best Brake Signals | ![]() | Check Price on Amazon |
The RideLite lighting system and use of snowmobile signal lights has become widespread in the US and Canada as a way of signaling in snowy regions. It incorporates three LEDs with optimum brightness, attached to the snowmobile as a convenient blinking signal for others to see. If you are on the trail with a group, the first and successive members will set their RideLite LEDs to yellow and the final member’s light will be green to mark the end of the group. This alerts nearby riders and drivers accordingly. Flashing the yellow light will indicate that you have encountered a hazard.
Table of Contents
Understanding Snowmobile Signal Lights
Snowmobile signal lights have three modes of operation – steady yellow, steady green, and flashing yellow. The steady yellow light indicates that there are more riders in the group behind the rider who has his light set to yellow. It will warn oncoming riders about the traffic trailing the rider. The steady green light denotes that the snowmobile rider is the last group member, and there is no rider behind him. If you are riding alone, then you can set the snowmobile signal lights to green.
Alternatively, you can set the snowmobile signal lights to a flashing yellow for signaling your group members and oncoming traffic regarding any hazards on the trail. Your fellow riders can pull over for assisting you while the oncoming traffic is forewarned to be on the lookout for issues on the trail.
Snowmobile signal lights can be really beneficial in low visibility conditions or during the night. At night, you may not be able to identify the number of riders coming from the opposite side in the glare of the headlights. The same can be true for bad weather conditions. A snowmobile signal light makes you aware of oncoming traffic so that you stay alert. It is easier to see in the dark or when the visibility is poor.
Installing Snowmobile Signal Lights
Overall, snowmobile signal lights are easy to install, especially for riders who are familiar with their sled’s electrical circuitry. As most of the snowmobile signal lights use LEDs, they draw very little power and last for years to come. You have to install the control box using a bracket and make the electrical connections to your snowmobile. There are three ways to connect the snowmobile signal lights to your sled electrically. They may require you to purchase additional equipment for installation.
- The easiest way to connect snowmobile signal lights is by plugging them into the 12V DC outlet of your sled. You may need to purchase an adapter or a wire kit for the same.
- You can connect the lights directly to the battery of your snowmobile. Battery connection is slightly more convenient to create as compared to the third method. You should add an in-line fuse when connecting the snowmobile signal lights to the battery for short-circuit protection. The fuse and fuse holder can be purchased for a few bucks.
- Alternatively, you may wire the snowmobile signal lights to the existing circuitry of the sled. You will have to be knowledgeable about the wiring of your snowmobile.
The light themselves may feature double-sided tape or adhesive pads for sticking them onto the sled surface. Some of them may require you to drill holes and mount bolts to your sled. Mounting lights using bolts is a more secure installation method. They won’t peel as the adhesive dries up with time.
You can also ask your local dealer or service center to install the snowmobile signal lights for you if you are not sure about the installation process.
Snowmobile Signal Lights
Snowmobile signal lights ensure safety for you and others, so you never have to move your hands from the bars. Here are some quality examples of snowmobile signal lights.
Hand signaling is a risky move when you are snowmobiling as a group and need to communicate directions with other members. Or even if you are trying to catch the attention of incoming traffic on a busy trail. Attempting to maneuver your sled with one hand is a dangerous gamble on winter terrains, combined with scattered focus and a high chance of split-second accidents.
Ridelite Lighting System
The RideLite lighting system and use of snowmobile signal lights has become widespread in the US and Canada as a way of signaling in snowy regions. It incorporates three LEDs with optimum brightness, attached to the snowmobile as a convenient blinking signal for others to see. If you are on the trail with a group, the first and successive members will set their RideLite LEDs to yellow and the final member’s light will be green to mark the end of the group. This alerts nearby riders and drivers accordingly. Flashing the yellow light will indicate that you have encountered a hazard. Snowmobile signal lights ensure safety for you and others, so you never have to move your hands from the bars. Here are some quality examples of snowmobile signal lights.
PowerMadd Sentinel LED Turn Signal Kit
Indicate your presence to nearby vehicles with PowerMadd’s high-quality snowmobile signal LED lights, available through Amazon. It includes a white and amber lighting system, in which the white running light switches off when you activate or flash the amber signal.
PowerMadd Black LED Light Kit for Sentinel Handguards (34490)
Providing a brightness of 200 lumens, this snowmobile signal lights kit has been approved with IP67 water resistance. You can purchase it online as a pair. The package receives high ratings and includes all the necessary hardware for convenient installation. These signal LED lights for snowmobiles can be used for ATVs and motorbikes as well. They can last for up to 30,000 hours of making you conspicuous to others and enhancing your own nighttime vision.
Show Chrome® – Accessories Factory Style Turn Signal-Corner Light Lenses
These high-performance snowmobile signal lights are designed to reach longer lifespans by withstanding any journey across cold terrains. Show Chrome offers leading solutions for your sled, creating its very own spotlight on the go.
Motone® – Billet Turn Signals
These snowmobile signal lights by Motone include lenses for the clear and amber lighting system. The designs come as black, brushed, and polished variants. Each casing is manufactured from billet 6061 aluminum. 12-volt amber bulbs are provided in the package; these allow your turning to become perceptible to the passing vehicles.
PR LED Strip Tail Light Turn Signal Brake Indicator
This versatile set of snowmobile signal lights is best for braking indicator, turn signal, and running light. It is easy to install and is also waterproof and shock-resistant. The energy-saving 32 SMD LED strip has a 3M adhesive tape that is compatible with snowmobiles and other off road vehicles.
Partsam 2 x 4.5 inch Snowmobile LED Stop Turn Signal
A set of 6 LED snowmobile signal lights provides amber/orange illumination at 12 volts for front and rear signaling in snowmobiles and other 12V motorcycles. Its adhesive layer can be attached to the surface easily. The lights are IP65-waterproof standard and purchased as a pair. They can serve as indicator blinkers, running and accent LEDs apart from being efficient snowmobile communication lights. The set has been evaluated at 4.6 stars by riders on Amazon, with positive reviews and increased customer satisfaction.
Leave a Reply