Snowmobiles.org

  • Accessories
    • Apparel
    • Helmet
    • Gloves
    • Goggles
  • Manufacturers
  • Snowmobiles
  • Trails

Winter Tactical Gear

October 23, 2021 by snowmobiles.org Leave a Comment

Winter tactical gears are of great importance as they can protect you from cold, rain, snow and other outside elements. If you don’t have proper winter gear, then you are the risk of injuries from the cold weather.

So, let’s see what all tactical winter gears you need to survive in the chilling weather. The basic requirement includes:

  • Primary layer/Base layer
  • Middle layer/Thermal layer
  • Winter pants
  • Jacket/coat
  • Gloves
  • Cap/ Hat
  • Balaclava
  • Winter socks

We need to properly layer these to achieve the purpose they are intended for, i.e. cold weather protection. Each layer has its own importance to claim for. We need to look for the best option to achieve the best warmth and the all round protection from the winter elements.

Now, it is the primary layer that comes into direct contact with the skin. So it should be chosen very carefully. The layer should be made preferably from fabric which is soft and has proper seam. If the fabric turns out rough or uneven, you may end up irritated out in the middle. The fabric should be moisture wicking. Synthetic materials have good moisture wicking properties. Merino wool fabric can be second choice for the fabric. This layer can be full sleeve or short sleeve as per your choice.    But it should be kept in mind that the fabric should be moisture combating. It is better to look for the quick drying ones. Otherwise, you may end up overheated, resulting in sweating and which may in turn make you colder. Odor resistance is also important or else, it would turn really uncomfortable for you.

Base Layers

Some of the options of base layer can be:

Under Armour Men’s Tactical Mock Base

With good Amazon reviews, they are made from polyester, the ColdGear Reactor provides the insulation as per your activity level with right comfort and breathability. Sizes S to 3XL are available. The reviews claim that they are super warm and comfortable.

Under Armour Men’s Tactical Mock Base

Meriwool Base Layer

Another base layer option based on good Amazon reviews is the Meriwool Base layer. Made from merino wool, it ensures good comfort. The fabric is soft and breathable. It offers moisture resistance and odor resistance. It can also be used as a middle layer. Sizes XS to 3XL are available.

Meriwool Base Layer

Thermal Layers

The thermal layer is the layer of winter tactical clothing that actually keeps you warm. Now even if the base layer fails in moisture wicking properties, the thermal layer can still help you. The layer actually traps heat close to the body and hold it there so even if external temperatures suddenly drop, you still have that protection you can be sure of. The fabric should also never constrict your mobility. You can also use more than one garment in the thermal layer.

Meetyoo Thermal set

With good Amazon reviews, they are made from polyester and spandex. The four way stretch fabric allows you maximum flexibility in your activities while you are out in the cold weather. It is lightweight while not compromising the warmth you require. The fabric is breathable and moisture wicking with quick dry technology which is an added advantage. Sizes S to 2XL are available.

Meetyoo Thermal set

Bodtek Thermal Set

Another good option of thermal layer you can get your hands on is the Bodtek Thermal set. The fabric is made from polyester and spandex mix, which offers 4-way stretchability. The fleece lining adds to the longevity. The fabric offers moisture wicking properties to make you feel comfortable all throughout the use. They also offer free mobility. Sizes S to 3XL are available.

Bodtek Thermal Set

Winter Pants

The cold weather operation involves a lot of mobility.  This makes comfortable and durable winter pants a must have in the list of winter tactical gears. The base layer in winter pants can also be of synthetic material like polyester or merino wool. However, when it comes to outer layer, you can look for other windproof and waterproof options. Also, it is found that winter pants with zippered vents can provide more temperature control and breathability when compared to the other options. Some of the winter tactical pants options include:

Magcomsen Winter Tactical Pants

Having good Amazon reviews, the Magcomsen Winter Tactical pant is made from polyspandex mix. TheDintex soft shell fabric helps in keeping you warm with added breathability and comfortability. The fabric is wear resistant, windproof and waterproof. They also offer zipper closure to offer the best in temperature control.

Magcomsen Winter Tactical Pants

CQR Winter Tactical Pants

The CQR Winter Tactial Pants have the Ripstop outer shell which is windproof and waterproof keeps you warm all the day. The inner fleece material is ultra soft and provides excellent heat retention.

CQR Winter Tactical Pants

Tactical Jackets

Tactical jackets are lighter than coats and provide less protection from cold. However, coats provide better protection when compared to jackets, but can restrict your movements. Vests can help you in no way in extreme conditions, so it is better to keep them out of your choice. In case of jackets, look for waterproof fabric. The jacket should be well ventilated with sealed seams. It should offer good fit with adjustable hem. Hooded jackets are preferred. In case of coats, look for the ones with outer shell preferably of nylon with water resistance properties and having soft lining. Good fit is also important along with comfortability and movement.

MAGCOMSEN Tactical Jacket

The outer layer is of polyester waterproof shell. Polar fleece lining provides added insulation. At the back, they have mesh lined vents. They also have zippers under each arm for ventilation. The hood is fleece lined and can be detached. Elastic hook and loop wrist cuffs allow adjustable fit. They have drawstring closure. Reviews claim they are great, but do have a nice check on the size chart. Sizes S to 2XL are available.

MAGCOMSEN Tactical Jacket

CQR Tactical Jacket

CQR Tactical Jacket is lightweight having water resistant outer soft shell with fleece lining. They have packable hood. The zippers at the underarm provide good ventilation. Velcro secure adjustable cuffs provide good fit. They have zipper closure. Sizes XS to 3XL are available.

CQR Tactical Jacket

Tactical Gloves

Other winter tactical accessories like gloves, hats, socks, and balaclava are equally important when you are out in those frigid temperatures. The best tactical gloves will provide maximum warmth with good dexterity. Go for the padded ones or the ones with hardened knuckles.

Ironclad Tactical Pro Glove

Ironclad Tactical Pro Glove has synthetic leather palm which is durable and neoprene/spandex shell which is flexible. The neoprene knuckle provides protection against impact and abrasion resistance. At the back of the thumb there is the terry cloth which can be utilized to keep the sweat away. They can be machine washed as they won’t shrink in the process. Sizes S to 2XL are available.

Ironclad Tactical Pro Glove

Kemimoto Tactical Gloves

Kemimoto Tactical Gloves are made from faux leather and rubber. They have hard knuckles with cushioning effect to protect your hands. The anti slip mesh enhance the gripping abilities. The thumb, index finger and the middle finger are made from touch screen sensitive material. Sizes M to 2XL are available.

Kemimoto Tactical Gloves

Tactical Beanies And Balaclavas

Now, in order to protect the head, from where you lose a lot of heat, hat or beanie is used. Look for moisture wicking fabrics.

2SABERS Tactical Beanie

2SABERS Tactical Beanie made from 100% polyester is a good choice. The lightweight microfleece lining which makes it warm and comfortable is fast drying. The design is non bulky ad it can be used under the helmet. Sizes S to XL are available.

2SABERS Tactical Beanie

M-TAC Elite Fleece Tactical

M-TAC Elite Fleece Tactical Beanie is made from polyester micro fleece. They collect heat around the head and hold it there providing maximum warmth in the area. They are lightweight and packable. The fabric offers moisture wicking properties with quick dry technology. Sizes S to XL are available.

M-TAC Elite Fleece Tactical

Achiou Winter Tactical Balaclava

A good lightweight ad durable balaclava can protect your head as well as the face.

Achiou Winter Tactical Balaclava is made from polyester spandex mix which is lightweight, ad breathable, giving the warmth with good windproof features. The top layer is moisture wicking and is fast drying.

Achiou Winter Tactical Balaclava

OneTigris Tactical Hood Balaclava

OneTigris Tactical Hood Balaclava provides head and face protection from outside elements. They are made from polyester and is breathable and lightweight. They give a skeleton appearance with the snuggle fit. Sizes M and L are available.

OneTigris Tactical Hood Balaclava

Socks

The feet can be exposed to prolonged time to the outside factors and hence it is good to go for two pairs of socks, which can offer the maximum protection. It is better if the first layer is made from moisture wicking fabric and the other layer is made from fabric providing maximum heat retention.

281Z Military Warm Boot Liner Socks

281Z Military Warm Boot Liner Socks made from Polartec fleece fabric keeps your leg warm and comfortable. They are soft, breathable and machine washable. They also remove excess moisture. Sizes S to XL are available.

281Z Military Warm Boot Liner Socks

Darn Tough Tactical Boot

Darn Tough Tactical Boot Socks is made from merino wool, nylon and spandex providing the necessary wrmth and protection. It has cushioning throughout the length to add comfort. They have moisture wicking properties with the merino wool being of quick dry nature. They are soft and breathable. Sizes XS to XL are available.

Darn Tough Tactical Boot

Wearing the right clothing and the right layers can make your winter activities comfortable and easy.

Filed Under: Accessories, Apparel, Gloves Tagged With: Winter Tactical Gear

Stackable Snowmobile Storage

October 23, 2021 by snowmobiles.org Leave a Comment

When looking for the best possible option to store your snowmobile, you need to make many considerations. The space available (outside and the inside), the number of sleds you have, the value of the sleds you have, where you ride regularly, the safety and other local regulations, your budget and other personal preferences.

Now you store the sled outside if you have space restrictions inside. This is also the cheapest possible storage space you could ask for. What you need is a good quality cover, or a tarp. You may need a pallet if you have more than one sled. In such cases, you may rack up the sleds in the pallet. However, there are many drawbacks of storing your sled outside. In most cases, there is high chance that you may need to dig the snowmobile out of the snow. This can lead to a lot of wear and tear to the sled and a lot of money being spent in the repair. Also, storing the sled outside is not so safe. A snowmobile parked in the snow may require prolonged warm up sessions. And the other main drawback is security issues. A snowmobile parked outside can easily be stolen and so it is good if you have full insurance coverage of your sled.

Another way to store the sled is to build a shelter for it. Now for this you can try the market available built in options or you can try making a custom based one yourself. Shelter provides better protection to your sled and may reduce snow damage to some point.

If you have to regularly move your sled to the trails by using a trailer, then it is better to house the sled in the trailer itself. They offer all round protection to the sled throughout the season. You can place other related accessories also. Imagine having two or more sleds and loading and unloading it every day. It is not an easy task. So if you have a trailer, you can keep your sleds inside the trailer itself ad you are good to go. It is better to have an enclosed trailer than the open one. An enclosed trailer provides good protection from the outside elements. You can still use an open trailer, but use a tarp to protect the sleds from snow, rain, etc.

In the above three cases, you may need to get the sled into the warehouse for be it repairing or for summer storage, you may need packaging solution. Clip Lok offers stackable package options in this scenario. They offer transport box for the snowmobiles which is stackable. The base of the box has clamps to strap the snowmobile so they remain fixed during the transportation. There is also a ramp for easy loading and unloading. So you can carry more sleds at a time to the warehouse. This method has proven to reduce the damage cost to the snowmobiles and also warehouse cost due to the stackable feature. You can check out the website to know more about this stackable snowmobile transportation system.

Now, that would be the case if you are housing the sled outside or away from your garage. The best possible way is to store the sled in your garage. So they are in close proximity and be less worried about the security of your sled. They are also protected from the outside elements. You can also repair them as and when needed. Also, the additional cost of transportation to the warehouse can be cut out. But, the problem here is that the sleds can take up more garage space and it may be difficult to move around them. The studs in the snowmobile can eve damage the garage floor.

There are many methods to address these issues. You can use snowmobile dollies to move around the sleds. But they may still leave the sled on the garage floor. Also, when having multiple sleds, the storage space issue is still not addressed. In such cases, the best method to store your sleds is the snowmobile rack system.

The snowmobile rack system offers vertical storage. So you can be sure that the space constraints are solved. You can maximize the storage options with minimizing the garage floor it utilizes. What more can you ask for? If you can simply lift one sled and make room for the other. The conventional ones have been made from wood with had winches. The latest models involve those built in steel and having electric winches which provides the additional easy of working with these storage systems. You can build one by using the storage system plans available in Pinterest and YouTube. They provide detailed explanation of how you can build one. Other option is buying the storage system from the companies building them. Some may provide you customizable options too. Some of the companies providing storage options are listed below.

Super Lift offers customizable options if you want to build one of your own. Their SNOWMOBILE 1000 Model has 1000lb lower and upper capacities with storage available for two snowmobiles. They have hand winch or electric winch option. They have easy loading ramp.

Super Lift

Brock Lift offers lift garage storage platforms for ATV, UTVs, Motorcycles, Dirt bikes and Snowmobiles. The Brock Lift 1100 has 1100lb capacity and 4ftX8ft platform. The motor has a power of 1.5HP. They have an all steel frame.

Brock Lift

The other model is the Brock Lift2000 offering heavy duty 6ftX9ft platform and lifting up to 2000lbs with the 2HP motor. They can lift up to two ATVs or snowmobiles.

Freestyle Projects offers storage systems with aluminum body and 12V electric winch.

Garage Evolution offers storage system with lifting capacity of 1500lbs, constructed from industrial grade steel.

With these options, you can indeed save a lot of space and keep the sled protected throughout the year. The right choice of the storage depends on your individual preferences.

Filed Under: Snowmobiles, Uncategorized Tagged With: Stackable Snowmobile Storage

Snowmobile On Dirt

October 23, 2021 by snowmobiles.org Leave a Comment

Earlier, the summer used to be a hibernation phase for the snowmobiles. However, this is not the case nowadays. People are finding way to make use of their sleds in maximum possible way. The investment on a good snowmobile brand is pretty good. Also, the why do we wait till winter when we can by any means utilize the sled for summer activities too. The snowmobiles have evolved a great deal from the conventional snowmobiles being used on snow to the new generation ones allowing it to be used even in some of the unconventional places with proper care. Now people are more into recreational snowmobiling exploring new arenas of the sport like driving the snowmobile on grass, dirt, mud etc. Drag races are common nowadays, be it on grass or other areas without snow. Grass drag racing is the most common form of dirt racing. Grass drag snowmobiling races are held on the trails covered with grass or dirt.

Now knowing that you can use snowmobiles on places other than without snow, there is a better need to under the basics of a snowmobile. Proper adjustments in settings are a must before we head out for the race. Safety precautions are also to be made. Remember that a snowmobile is basically designed to work on snowy tracks. So we should set some limitations to its use in other areas. Overusing the sled can indeed cause damage. However, with a good snowmobile you can push yourselves to the extremities.

A good amount of research is required to find the legal places where we can let our snowmobile, the associated gears we can use, the settings we need to change, engine oil, lubricants and the care we need to take of our sled. If the snowmobile is used for extra purposes, then they also demand extra care from us. Even older snowmobiles with good set up can be used to race in grass or dirt. The drag races are usually coming under the preview of the rules set by International Snowmobile Racing. The snowmobile manufacturers, performance shops and the snowmobile race circuits will have access to these guidelines based on which you need to prepare the sled. It is in your part to make sure that your sled is safe and legal to race.

The snowmobile drag races are usually held by snowmobile clubs of the associated areas. With proper guidance from these clubs, even beginners can head out to enjoy these summer races without second thoughts.

Snowmobile On Dirt

How to prepare the sled to be used in grass or in the dirt?

The point to be discussed in length is how we can bring the best out of our snowmobile in the scorching heat. Obviously, there need to be many considerations to be made mostly involving trial and error methods before we can expect our sled to be fully prepares to grace the summer race.

The first and the foremost important preparation we need is that of the suspension.  The suspension is an important part in the working of the snowmobile. Preparing the proper suspension for the summer activity involves proper weight transfer settings which allows the snowmobile accelerate with ease. If we go for the ideal set up, this involves the sled transferring the weight quickly at the moment of take off. Also, the skis shouldn’t touch the ground as this will lead to the drag slowing the sled. So the skis are usually placed one or two inches off the ground, holding the position until the end. Now if the weight transfer is too much that would create trouble for traction. In such cases, the front may raise too far, not allowing the track to touch the ground.

The weight transfer is checked with the driver sitting in the ready position while the helper lifts on the front bumper. The front should be able to be lifted with ease till the skis are about 2 inches off the ground. On reaching 2 inches off the ground, more effort is required to lift the sled. This accounts for the proper weight transfer setting.

The correct transfer also involves lowering the front end and the back half of the rear suspension.  For lowering the front end, we may need soft springs, short shocks, shock spacers or straps. Shock spacers are the best way to lower a sled, but may cost you around $100 to install a set. Tying down the front end using straps is the easiest and the cheapest method. But this may hamper the effectiveness of the suspension.

Now for lowering the rear suspension, we may need a limiter strap and a shortened rear shock. The weight transfer is tuned by adjusting the length of the front limiter straps and spring. Once this is set, the sled will now axle on the center shock and spring.  Now we have to adjust the correct length of the center shock and front torque arm, making sure that the spring is stiff. Skis should be held off the ground during the run.

The snowmobile track should connect well with the surface under it. This is known as traction. Next requirement you should have in setting up the sled for drag racing would be good traction products. The most common traction products are the studs. You may require the best stud and configuration suiting the race track you are in. Studs like chisel pointed ones have a big face which can grab more dirt for traction than the pointed ones available in the market. But they may require more power to be pulled out of the dirt which is a disadvantage. For those racing tracks with a clay starting line, it is preferable to use chisel stud and ice picks. When using studs we must keep in mind that their weight can add up and increase the weight of the track. Also if not used enough they may cause slip due to lack of proper traction. So we should be aware of these aspects before hunting down the best traction products.

Next, we need to check the fuel before the race. Fuel is what burns and keeps the snowmobile running. Some of the race circuits may provide the fuel. So it is always good to have a word with them earlier on this. For improving the performance on the race day, you may add leaner jets in the carburetors, which can adjust with the fuel delivery needs to bring about the momentum we need. Test runs are needed to verify the performance of the jets used in the carburetors. Do not go for engine modifications as they are not allowed by trail and stock classes.


Now, the next important consideration is to reduce the rolling resistance brought about by the component called Hyfax. Hyfax is a hard plastic strip attached to the bottom of the rails of your sled. It can offer a substantial amount of rolling resistance to the drag racing involving grass or dirt. So it is better to get them removed and use idler wheels as a substitution. The metal or hard plastic idler wheels can be a great option for substitution as they can provide less rolling resistance when compared to those with rubber contact surface. Also it is found that the thin idlers offer less rolling resistance when compared to the thick idlers. Removing grease from the bearings can also reduce the rolling resistance. In order to achieve this, you can try removing the seal from the bearing and then wash the grease with a good lubricating spray .You can then reinstall the seal back to the bearing to prevent the contamination of the bearing with dirt and other debris. You should not forget to add grease to the bearing before taking your sled out for the next winter race.

Proper clutch is something important to look up to. Fixing the best clutch performance is a trial and error method requiring fine tuning at many instances. A lot of effort may be required to bring about the best setting.  It is always better to consult a mechanic in the performance shop having experience working with drag race sleds who can give a better insight into the process.

 Gear performance should also be of top class when you are out in the terrain. Most manufacturer manuals give directions regarding the gear performances. So it is better to check them out before making changes and they can indeed help you in a great way. The most common scenario involves the top gear to be turned down by four or six teeth. For this, you may need a shorter chain which needs to be installed.

In race holeshots are important. The correct belt setting can make sure that you achieve the holeshot you need.  The more the traction at the ground, the more the chances of belt slip. Scouring the belt with emery cloth between each run is found to address this issue to some extent. Acetone or clean water can be used to remove the dust from the belt before reinstalling it.

Filed Under: Snowmobiles Tagged With: Snowmobile On Dirt

Snowmobile Aftermarket Shocks

October 23, 2021 by snowmobiles.org Leave a Comment

The Suspension system of your snowmobile is an important part of the setup for the medium and advanced snowmobile riders. It can change the entire feeling of the machine. The correct suspension can make your sled far more predictable and can make them approach any terrain with ease.

Most of the snowmobiles incorporate a suspension system having at least four shocks. The ride height or the possible load your sled can carry is managed by these shocks. The ride height can be adjusted based on the requirement. There are mainly three types of shocks. They are air shocks, nitrogen filled shocks and coil shocks. Most of the present sleds come with these high quality shocks as part of the suspension system, that can be adjusted as per the need for make the sled more efficient. You can also try from a wide range of aftermarket options of these shocks. The market is flooded with a wide variety of aftermarket shocks which can offer you more customized and design features to choose from when compared the OEM counterparts. Their availability is also not an issue. So you can always watch out for these aftermarket options when planning to customize your sled or replace the suspension system.

Raptor shocks

Raptor Shocks is the leader in aftermarket suspension products. Their suspension components are machined to match the specifications and the tolerance levels. They offer suspension parts for snowmobile brands like Ski-Doo, Polaris, Arctic Cat and Yamaha. They use their kinetic series which is an internal bypass technology in combination with their new Anti Pack Valve piston design for providing the required amount of control.

Raptor shocks

The Raptor ACE Rear set of piggyback style includes front track shocks. The Kinetic Internal Bupass Technology provides better compression and rebounding adjustment.The Advance Coilover Engineering design replaces the conventional torsion spring technology. The rear pivot is constructed with the high strength and durable billet aluminum. The coilover rear track shock packages with custom valving and spring combinations make this a really efficient performer. The rear torque arm is fabricated with Chromoly 4130 tubing which is lightweight and at the same time has excellent strength features. They offer good performance and predictability in the rough trails.

KIMPEX Suspension Shocks

KIMPEX Suspension Shocks

KIMPEX, who are one of the front runners in the aftermarket goods also offer suspension shocks. It fits the Polaris snowmobile models and is of gas type. It is a direct OEM replacement product which offers maximized comfort in the rough terrains.

Zbroz Racing

Zbroz Racing offers high class models of suspension products to make your snowmobiling experience worthy. They exceed the OEM counterparts in terms of durability, weight and performance.

Zbroz Racing

Zbroz XO Exit Center Shock is compatible with the Ski-Doo Gen 4 Summit 850(2017-2022) models. It is a coilover gas shock, which offer more control, comfort and stability in your ride. The coilover spring will deliver smooth ride on the trails with aggressiveness enough to handle the jumps and drops. Made from billet aluminum, they are hard anodized on all surfaces which offer extreme wear resistance.

Zbroz Racing also offers full service to these Exit Shocks.

FOX Shocks

The FOX internal bypass technology use internal spiral grooves in the shock’s ride zone to improve the bump comfort. They have also introduced lightweight shock springs for the Polaris models with weight of about 0.78lbs, almost 49 percentage reduction in weight compared to the earlier 2020 model

The FOX 1.5 ZERO Quick Switch (QS) coil shocks make use of the advanced mountain sled suspension technology which makes them lightweight. You can ride harder in the backcountry without compromising the durability of the system. You can experience an advanced control of the sled on top of the snow with the lightweight shocks.

Based on the conditions, the FOX’s Quick Switch technology can make you adjust the compression and rebound damping with ease. There are three simple position adjustments, so that you don’t have to count the clicks. You can focus on the ride and enjoy the moment.

These coil-sprung mountain shocks are designed with two primary objectives: weight reduction and ride performance without compromising the comfortability The FOX 1.5 ZERO coil-sprung shocks are optimized through material reduction without sacrificing the quality of the ride or the integrity of the structure. The coil springs were redesigned in such a way that they retain the same spring rate with fewer coils. They are also built from a lighter steel alloy. Whatever be the temperature fluctuations, the shocks are designed to maintain a linear feel, thereby making the sled setup quick and simple. So, we have the new coils which actually result in a spring with the same performance but almost half the weight of the predecessors in the field.   

FOX Shocks

The damping technology used in FOX 1.5 Zero Quick Switch Coil Shock is position sensitive. The technology actually has its origins in desert truck racing and is now applied to the Factory Race Series coil-sprung shocks. Spiral grooves are present inside the shock which allow the oil to flow around the main piston, thereby reducing the damping force in the ride zone. This enhances your riding activity by giving a plush feel. During the final 30% of the travel, the bypass grooves terminate which forces the oil to only flow through the main piston. This provides a significant increase of bottom-out resistance. As a result, the hard hit if any is kind of cushioned. Thus, you can maximize the power-to-weight ratio of your sled by grabbing your hands on the FOX’s new mountain shocks which are lightweight and durable.

SP1 Gas Suspension Shock

SP1 Gas Suspension Shock

Gas Suspension Shock by SP1 is a high class product made in accordance with the industry standards. They offer everlasting reliability and value. They are made from high quality material with advanced equipments. Each SP1 product is specially designed to work the same way or the better way as its OEM counterpart. They offer 1year to 15 months warranty for their products.

Filed Under: Parts Tagged With: Snowmobile Aftermarket Shocks

Screw In Snowmobile Track Studs

October 23, 2021 by snowmobiles.org Leave a Comment

In most cases you may not be aware about the basic need of the accessories associated with your snowmobile. It is always better to have a basic detail about them and how they perform. Snowmobile Track Studs are important as they help in proper traction of your snowmobiles. They can help you a lot from sliding and associated wear and tear.

What exactly is a Snowmobile Track Stud?

A Snowmobile Track Stud resembles a small tack made from metal which when added to the snowmobile track can help you in traction and braking. Constructed from steel or stainless steel, they have carbide tips. Snowmobile Track Studs of various types and lengths are available in the market and you can get your hands on the one of your choice.

What are the functions of Snowmobile Studs?

Snowmobile studs provide the grip you need while sledding. They can help you stop down even if your snowmobile’s track locks up. They help in acceleration by providing the holeshot. They also help in cornering, stopping the back end from swinging around and becoming the front end.

Types of Snowmobile Track Studs

There are mainly two types of Snowmobile Track Studs:

Screw in Snowmobile Studs

Being pushed through the track, these studs require. They won’t rip the track as they have bigger backing plate.

T-Nut Snowmobile Studs

They are lighter than the Screw in Snowmobile Studs. They have caused damaged to tracks in some cases.

Snowmobile track’s lugs are important when choosing the stud. The stud that you look for should be about 3/8 inches longer than slug height or else it can lead to clearance problems and damage to the exhaust of the sled.

Steel or stainless steel studs with carbide tips are the most common. Carbide remains sharp for a long time. That is why carbide material is chosen as the tip for the stud.

Some of the Screw in Snowmobile Studs in the market are:

IGRiP Screw in Snowmobile Track Studs

iGRiP is a Canadian company offering screw in studs. iGRiP offers screw in studs for your snowmobile irrespective of new or used tracks. These inexpensive easy to install studs are silent. They are lightweight and hence they will not add to the weight on the track. As a result, they are not going to puncture your radiator. The iGRiP Screw in Studs can do a great job when braking and accelerating and thereby ensuring your safety in the trails. On those icy curves, you can now be stable and secure with good control over the sleds. Note that for snowmobile tracks, you need to pre-drill the holes. Thus being in the middle of the track lug, this will allow the studs to go in straight.

Now, the good news is that they have the installation tools in each of the packages. Also, keep in mind that for easy insertion of the iGRip studs, you can dip them in soap dish or any other non petroleum lubricant.

One of the models used in snowmobile track, the ST-25R iGRiP Standard Racing Studs. The model provides enhanced traction. The tip of the screw is made from tungsten carbide. The body is made from hot dipped steel which is galvanized. They have big threads to provide good anchoring. They are lightweight, easy to install and dismantle and offer lasting durability. They are available in 100, 150. 200. 250 and 1000 unit packages.

IGRiP Screw in Snowmobile Track Studs

Ins Products Icemaster Screw In Studs

INS Products are in the business of high quality carbide products for better traction and minimizing the wear. The Icemaster Screw in Track Studs offer lateral projection required without the need to drill the track. The carbide tips are large enough to dig in. Being able to screw into the top of the lug and requiring no drilling. They also provide the necessary acceleration and braking at the required time. These are easy to install screw in studs which don’t necessarily require tunnel protectors. When compared to today’s push through studs are costlier and add weight to the track whereas, the Icemaster mounted on the lugs are rigid enough to provide positive traction control. Installation tool SR-31 is recommended for installation purpose.

The sharp 70 degree carbide tip gives the necessary traction. They have large, high profile carbide head. The sharp, deep, self tapping threads without the need for drilling provides the best hold you need. The plated finish prevents rust and they can last several seasons. They are available in three lengths: for lugs less than 1 inch, for lugs between I inch and 1¼ inch and for lugs over 1¼ inch. They are available in 100, 250, 500 and 1000 unit packages.

Ins Products Icemaster Screw In Studs

Woody’s Snowmobile Track Studs

The Woody’s have over fifty years experience in the industry. They offer variety of studs for the optimum safety, control and performance. They offer Trail Studs and Competition Studs. The Trail studs allow you to stop sooner and take off faster. They offer enhanced performance with good safety and control features. Competition studs designed for specific use have aggressive performance and weight advantages.

Grand Master Pro Stud from Woody’s can be used in single ply tracks. They have a 60 degree carbide tip providing the aggressive profile required penetrating into the hard ice pack. The 1.2 inch head with anti rotation lines allow the pressure to be distributed on a wider area.

Stud Boy Snowmobile Track Studs

Stud Boy Snowmobile Track Studs

Stud Boy manufactures snowmobile track studs and backers, along with snowmobile ski wearbars.

Stud Boy Power Point Stainless Steel Stud is one of the best selling studs in the market. Bing stainless steel, they do not rust. The stud is set to offer great durability in performance with corrosion resistance. They are lightweight. The 60 degree carbide tip can be attributed to its superior penetration in the ice. The head size design is of one inch in diameter providing track trapping leading to superior support and reducing the “cookie cutter” which may cause track failure. Proper traction is ensured by the tapered shank and thin penetration profile. Several length options are available. These include 0.875″, 1.000″, 1.080″ and 1.187″

The studs with length 1.375″are packaged with 0.500″ support nuts. They are available in packets of 24, 96,144 and 1000 units.

Stud Boy Snowmobile Track Studs

Filed Under: Parts, Snowmobiles, Studs Tagged With: Screw In Snowmobile Track Studs

  • « Previous Page
  • 1
  • …
  • 25
  • 26
  • 27
  • 28
  • 29
  • …
  • 44
  • Next Page »

Recent Posts

  • Underglow Lights for Snowmobile – 2024
  • 3 Place Enclosed Snowmobile Trailer – 2024
  • Tilt Load Snowmobile Ramps – 2024
  • 10 Best Snowmobile Pants – 2024
  • 10 Best Snowmobile Suits – 2024

Pages

  • About Us
  • Contact Us
  • Privacy Policy

FTC Disclosure

snowmobiles.org is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

Copyright © 2026