Skis - Snowmobiles.org

Best Snowmobile Skis

October 20, 2022 by snowmobiles.org Leave a Comment

Skis are a vital part of your snowmobile. If you are looking to upgrade your stock setup or replace it due to some issues, the market is never short of options. So it is better to have a proper understanding of the different aspects regarding snowmobile skis so that you can get your hands on the best option. Without proper knowledge, you may end up with something not worthy. This article will take you through the options of the best snowmobile skis. Here is what you need to take into consideration.

What Are Snowmobile Skis?

Snowmobile skis are an important part of your snowmobile. Without them you can’t take your snowmobile anywhere. They actually guide the snowmobile’s forward momentum and also turn the snowmobile as you turn the handlebars. They are usually made of metal or plastic. Much like the front tires of a car, the skis must be maintained and kept in proper alignment or else you may find it difficult to steer the snowmobile.

Stock Skis And Aftermarket Skis

Now if you are somebody in the need to buy new snowmobile skis, it is pretty common to wonder if all skis are the same and whether they fit all the snowmobiles. Most of the snowmobile manufacturers like Ski-Doo, Arctic Cat, Polaris, Yamaha, etc. do have their own stock skis. Built for the average rider, these stock skis can be universal, but that doesn’t mean all of them should be universal and you can use them interchangeably in different snowmobile systems. There are snowmobiles that are ski specific and in such cases, you may need additional hardware to make the skis fit in. Apart from these stock skis, there are also aftermarket counterparts. These aftermarket snowmobile skis tend to work much better as universally fit snowmobile skis. They also deliver better performance for the different levels of riders. They will let you have aggressive snowmobiling with better cornering and reduced steering effort. These aftermarket skis are also found to be more durable.

However, though universal, there can be slight differences in the mounting points and the type of saddles you may need. Also, the ski you need depends on your riding style. The table below gives an idea about the average dimensions of the ski that you may need for different riding styles.

	Trail	Crossover	Mountain	Racing
Width	6″ – 6.25″	6.75″	7.5″ – 8″	7.25″
Length	44″	45″	42″ – 45″	45″
Center Keel Height	0.75″	1″	1″	1.5″
Weight (per ski)	6.8 lbs	8 lbs	7 lbs	8 lbs

What To Look For When Buying Snowmobile Skis?

Keep the below-mentioned factors in mind before changing your snowmobile skis.

Design and Features

The design and features of the ski you need will depend on your riding style. The ski width is an important feature affecting the performance and handling characteristics. Mountain riders in deep powder condition will have to look for wider. As the ski width increases, it disperses the weight of the sled’s front over a larger footprint and thus enables more floatation. So for mountain riding, you may have to look for wider skis. Mountain riders may have to look for 7.5 to 8 inch width skis. Hardcore mountain riders may prefer much wider skis ranging from 8 to 10 inches. However, when it comes to trail riding, wider skis are not preferred. This is because the extra width may make it difficult to turn. Also, long track sleds featuring skis with extra width tend to push through corners on hard-packed snow. So if you are a mountain rider, who will also explore powder, then there is a need to compromise. This means you may have to look for a narrower ski or one with keel design meant for trail handling. With a square edge keel, you get a better bite on the hard packed snow. You also get good sharpening ability if the wear rod is placed directly under the spindle.

The keel and wing design on the underside of the ski are other features which can influence the handling capabilities of the sled in powder. With multiple keels, snow will get trapped under the ski which will lead to the bite needed to turn in loose snow. Also, with the smaller wing features on the edge of the ski, it will further help trap the snow and give the necessary bite while sidehilling.

Also, many keels can perform best in specific snow conditions only. So you need to match the keel design to the riding environment you are mostly in. Trails being hard surfaced, precision of handling and the ability to absorb punishment are key features to look for. This is greatly affected by the wear rods you use and the keel design on the ski. In most cases, the aftermarket trail skis allow positioning of the wear rods such that they can create the best bite and eliminate darting. With good keel design, you can have the best steering possible with reduced darting. Many aftermarket skis have keel designs which are favourable for this. With narrow skis, easier steering is made possible for the rider. Also, as trail sleds do not demand much floatation, skis can also be as narrow as 6 inches.

Backcountry or crossover snowmobiles need skis specific to the purpose. For achieving the optimum performance while boondocking a wider, more mountain style ski is preferred. It should be of 7 to 9 inch ski width.

Occasional riders need to look for more of trail oriented skis. In such cases, a 7 or 8 inch ski width with a keel design favouring trail riding is a good choice. The overall width should be such that it can get through the occasional powder, though it may not be the best in deep powder conditions.

Whether The Snowmobile Ski Is An Upgrade Or A Replacement?

If you are looking for a better upgrade, then the market is never short of options. Based on the type of riding style, you can have the best option for you. If you are trying to find a replacement for your damaged ski, possibly in a single side, it is better to have the OEM version as it is better to have both the skis of your snowmobiles matched.

Hardware For Installation

In case of upgrades, it is better to look for snowmobile skis that include all the mounting hardware as this can make the installation process a lot easier for you. If you are having a replacement, then you may have something to reuse from the existing ski.

Budget

As with anything and everything, the budget you have set aside is a governing factor in deciding the skis that you will end up with. If you want quality skis which are high on performance, you may have to spend more. Also, it is better not to invest in something cheap as these equipment are actually related to the overall safety of your snowmobile. The aftermarket will surely give you a wide mix of options to choose from so that you never feel short of options.

Best Options of Snowmobile Skis

Now as we have a basic idea about what snowmobile skis are and how we can select one, it is bets to know some of the best market options of snowmobile skis.

C&A Pro Razor RZ Skis

The C&A Pro Razor RZ is the best aftermarket option to have. It offers the best in class top quality performance for a snowmobile ski. Made of the UHMW poly material, it is built strong and durable. Though lightweight, they are built to perform well under a lot of stress. They are set to offer the best performance, whatever be the condition you are in.

There are 90 edges throughout the running surfaces of the ski and this includes the keel. As the outer keels are V shaped, they offer extra mobility with good control. Also, with the unique edge design you get the extreme penetration in cornering without any lift. It also provides supreme aggressive control for racers. Also, if you are a recreational rider, you can be at peace on the trails as darting is pretty much educed. The X EDGE design also helps significantly in diverting the snow away from the front, as a result of which the visibility is improved as snow spray is kept away from the rider. With the adjustable, flexible tip, you can have better customized as well as versatile performance. The installation procedure is straightforward.

Sold in a pair, they are not so affordable and are priced above $300. Also, you may need to buy separate mounting hardware, which takes the cost spectrum further up high. However, they are indeed the best choice for sleds that are 2011 and older. Also, for trail sleds that are 2012 plus and newer, the XPT model skis can be the best choice. They are available in about 7 color options. There are also other models like the XCS for the aggressive crossover rider, XT for snocross racing, BX for technical mountain riding, etc.

Camoplast Universal Touring Ski

Camoplast Universal Touring Ski is unique as it has a one piece blow molded construction. This is a great upgrade which sets this snowmobile ski apart from the stock skis, offering reliable performance. They are lightweight, yet strong and durable. They feature an aggressive keel so as to offer good steering control. It is the best option for backcountry ski touring on snowmobile. You can explore far off trails without getting dragged down.

It is easy to install. They are sold as a pair. The mounting hardware and carbides are sold separately. The setup may not be perfect for racing on the trails as they are not meant for speed and cornering. Also, the plastic design though durable may not last longer if you hit stump or rocks. Available in black color, they are very affordable and the pair of ski will cost around $120. Models like Exo-S Touring Camo Skis are meant for trails. Exo-S All Terrain Camo Skis is meant for cross country ad utility applications.

Curve XS Skis

This standard trail performance ski is well suited for the icy trail conditions. It has a durable UHMW polyurethane construction. The lightweight ski is built strong and durable. The parabolic design makes way for a wide intake profile and larger edge surface area. The wide footprint will give extra float in the deep snow. This gives optimal performance without slowing you down. The single keel design brings about improved cornering abilities and steering control is made easier. They also let you have precise handling as well as turning ability. They have the ability to handle fast turns. With variable geometry, the performance is quite predictable. Straight tracking allows minimal deceleration darting. The flat shield platform will assist in engaging and maintaining a sidehill. All this makes them best choice for racers and snocross riders. They are universal and can be mounted on most snowmobiles.

The installation procedure is straightforward. They are available in a wide variety of colors to match with your sled. This lets you have the best in terms of customization. Skis are sold individually. It is better to get your hands on the kit or else you may have to buy all the hardware separately. The full kit will cost you around $200.

The Curve XSM skis features an all new mountain profile for increased sidehilling and carving performance. While the Curve XDP ski is built for speed.

Raider All-Terrain Skis

Raider also comes with a blow-molded one-piece snowmobile ski. So there is durable performance without broken or loose parts. This ski which is light weight, yet strong and durable option also comes at an affordable price. This is the best option of snowmobile ski if you ride in deep powder. They provide enhanced handling for a smooth and safe ride. The wide one piece design will not let them sink in the deep snow, thereby offering stability and control to keep you afloat. The can also work well in most off trail situations other than deep snow. However, you may not get the responsiveness when working with hard packed snow.

The snowmobile skis are easy to install. Though affordable, the mounting kit and carbides are sold separately. The skis are sold as pair. Available in black color, the pair of ski will cost you around $130.

Kimpex Rush Ski Kit

Kimpex Rush Ski Kit is very lightweight and offers good stability to be used under all conditions. The skis are made of UHMW material. The keel is so designed to reduce steering effort as well as darting. It features a raised rear portion for facilitating reverse driving. The integrated fixation provides extreme rigidity while providing faster installation. With the predrilled holes, it allows for easy installation.

It is sold as a kit including carbide runners, adaptors, rush and handles. The versatile skis are also compatible with other runners. The ski kits are also available in different color options. It will cost you around $320 for the kit. Kimpex Steath Ski kits offer wider width for better floatation.

Slydog Snowmobile Skis

The original trail ski from Slydog debuted over 15 years ago. They also offer new ski models. Your sled can perform well, whatever be the riding situation; if it is powder or the trails. So you can have skis for all terrains. All these models are custom molded using UHMW plastic ensuring strength and durability. They are lightweight as well as strong. Also with the patented reverse-angle keel technology, you can have good control with minimized darting. Each model is meant for specific performance depending on the riding style and the design of the sled. The Command is meant for the trails riding, serving as a perfect OEM upgrade or replacement. The Attack is meant for mountain riding and deep powder conditions. The Powder Hound is a Crossover style, build for powder and for trails. The Powder Hound offers maximum floatation for heavy sleds in deep powder. The Hell Hound is meant for Snocross Racing involving extremely aggressive riding.

The Slydog Snowmobile Skis can be seen as affordable alternatives to the old and damaged OEM skis. The models are easy to install. They are sold as a set with base price starting from $315.You can have different color options. There are about 19 color options, which indeed a wide range is keeping in view your customization needs.

PowerMadd Mini Skis

If you are someone owning a mini sled and looking for ski upgrade or replacement, then we have that option for you. The PowerMadd Mini Skis are the ultimate performance upgrade for all mini sleds for pro stock and open mod drag racing. These high quality compression molded skis are lightweight while being strong and durable. They will also reduce friction.

The pair is sold separately. You need to buy other components separately. They are available in different colors. They will let you have an easy installation if you follow the instructions. The pair of skis will cost you around $200.

Snowmobile Ski Alignment

October 25, 2021 by snowmobiles.org Leave a Comment

Snowmobile skis are used for providing the effective steering that you need when you are out in the snowmobile tracks. They provide the directional control. We can say that the ski and runner configuration has a great influence on how the machine is handled. They curve upward stopping the machine from diving into the snow as it is smashing forward.

How the Skis function?

The snowmobile is steered by turning the handlebars. The handlebars connect to the front of the snowmobile where we have a mounted stem and this in turn is connected to the bottom of the snowmobile where we have the skis mounted on the bracket. As a result of this, when the handlebars are turned, the skis also turn in the same direction.

Now, the skis come in different widths and sizes suitable for the different terrains. There are also single and double ski models. Narrow skis are helpful in achieving the sharp turn that you need to take while on a ride. Wider skis enable the snowmobile to float higher over the snow as they displace the sled’s weight over a larger area.

Materials used for making skis

The earliest skis were made from wood that was designed to sustain the weight of the heavy engine and the chasis. There were obvious durability issues which lead to the introduction of metal skis. The metal skis reduced the bulkiness and also improved the durability of the skis. However, under deeper snow conditions, there was this common problem of snow getting frozen to the bottom of the skis. This literally created snow brakes on the skis. Paint or coating of the skis worked, but not on the long run. There were also Aluminum models which are lighter than metal skis but there were still snow freezing issues. With the introduction of plastic skis, there has been a great advancement in the ski technology.

Plastic skis can slide through the snow in a better manner. They flex as they are lighter. They actually add a new dimension to the sled’s suspension.

Darting

Correct snowmobile ski alignment is an important aspect of sled set up. It can actually make a difference in your ride. It can make you love the ride on your sled or make you hate the ride. And if not properly aligned, you may also face darting which is frustrating.

Dating is an issue associated with ski alignment. It can also be caused due to damaged carbides, incompatible tracks, worn out wear bar etc. Now as we are dealing with ski alignment, let’s address this cause.

Your sled is said to dart when the sled skis encounter ruts and they shift into other tracks on the trail while you are riding. Too much pressure on the skis can be a reason for this. If so, you may need to modify the sled’s suspension so as to adjust the pressure on the skis. Pressure on the skis can also be decreased by adjusting the rear suspension. If you want to make further adjustments, you can also extend the limiter strap on the rear suspension. All these adjustments should be done slowly. Test the sled in between to verify if your adjustments are going in the right manner. Keep in mind that the suspension adjustments are specific for each riders based on the weight, the terrain and the type of riding they are into.

Misaligned skis can be another reason why your sled is darting. The misaligned skis can reduce the pace of the snowmobile jeopardizing the performance of the sled. Toed in ski alignment can also be a reason for darting. This is because in the toe in alignment, each ski will try to track its own route in the snow. Misaligned skis can also cause more power consumption due to rolling resistance.

So we have seen how misaligned skis can hamper our riding experience and lead to darting and associated power loss. This calls for a need to properly align the skis.

How To Align Snowmobile Skis?

Once the winter season approaches you might be into high dollar improvements on your sled. But all this will go in vain if you don’t have your sleds skis properly aligned. As said earlier, they can have a big impact on your riding experience. So it is not a bad idea to invest your time to this cause.

To align the snowmobile skis, follow these steps:

Firstly you need to put the snowmobile on a firm and level surface.
Now, with the help of handlebars, position the skis straight. You may also take the help of spindle alignment kit for your sled to achieve this.
Settle the front end of your snowmobile by pushing it down a couple of times as needed.
The next step is actually an old suspension trick which may sound strange but it help you eventually in achieving the toe out condition which is considered more desirable than the toe in condition. So what you need to do is to place a bungee strap across from one ski handle to the other ski handle so that it holds the skis together at the tips.
Take a pipe, straight edge or 2×4 and set it alongside the snowmobile’s back idler. The length of the pipe should run next to the skis inside edge. Left or right, any side would be okay.
Now check the distance between the straight edge and the skis inside edge by using a measuring tape.
Take two measurements at the front and at the back of the ski. Your skis are properly aligned if these measurements are equal.
Adjust the steering rod nuts in accordance with the sled’s company specified manner to bring about the proper alignment.
After each steering rod adjustment ensure that your handlebar is straight.
Repeat the steps on the other side also.
Recheck the measurements and remove the straight edge.

If done in proper way your skis will be properly aligned leading to a good riding experience. Remember that good riding experience is an outcome of a number of pre adjustments that we make on the sled and the gears with proper care and based on the sled manufacturer instructions.

How to choose the Best Aftermarket Snowmobile Skis – Pros and Cons

October 17, 2021 by snowmobiles.org Leave a Comment

As winter draws close, one thing comes to mind, it is an excellent time for winter games. It’s the time of the year to snowmobiling again. If this is your first time, you don’t have to worry. Anyone can enjoy snowmobiling. It is a very fun-filled activity to let off some steam and reduce your stress levels during winter. If it’s not, brace up for exciting moments as you make ready.

It is time to get ready for your snowmobiling vacation and check everything off that list you’ve got for what you will need during the trip. You should get your outfits, helmets, jackets, and shoes for snowmobiling ready to go. Oh! Guess what else you need to have to make this vacation more fun and interesting; the best aftermarket snowmobile skis.

You should have the best aftermarket snowmobile skis in your snowmobile checklist/gear. As you get ready, it’s pertinent to mention that the type of snowmobile skis to be selected depends on the trail it is to be used on, what it is made of, and how it is designed. It is important to choose the best snowmobiling skis you can afford to make the vacation much more enjoyable.

To help you through your concerns, outlined below are a few reasons why you should use the best aftermarket snowmobile skis.

Why you should use the best Aftermarket Snowmobile Skis

They increase your ability to handle your sled:

The best aftermarket snowmobile skis improve your sled’s handling. It means it becomes easier to make more turns and to move across the trail. Snowmobiling skis for trails are usually narrow for this purpose. And an essential aspect of snowmobiling is successful making turns on the trails. You should definitely use aftermarket snowmobile skis.

They are great for deep levels of snow:

The greater the level of snow on a trail, the harder and more difficult it is to snowmobile on. This is another reason for you to use Aftermarket snowmobile skis. They are designed to function on trails with great levels of snow. So you don’t have to be worried about that great mass of snow you have been warned to stay away from. Aftermarket snowmobile skis have got you covered.

They provide a level of security:

This is a good reason to purchase those snowmobile skis. While they allow you to make quick turns and glide across trails, they also provide a certain grip on the snow which enables you to not slide off too easily. Consequentially, they provide protection for your sleds colliding with objects along the paths of trails and possibly, other snowmobilers.

They are top-tier snowmobiling skis:

Aftermarket snowmobile skis might be the best type of skis for your sleds. They have intricate designs and they also improve your sled’s handling. And all this at affordable prices. Let us not forget that these skis are built to last for many years once purchased. If you are looking to buy skis of premium value for your snowmobiling vacation, you should definitely go for the best Aftermarket Snowmobile Skis.

They are advanced:

These types of snowmobile skis are high-performance skis that can be used by all levels of riders. That’s right. Even a beginner can get started with them. They are also compatible with almost all kinds of snowmobiles. So, you don’t need to be worried about how difficult it might be to find skis compatible with your sled.

Qualities of the best Aftermarket Snowmobile Skis

Anyone can find a ski suitable to their needs, as there is a myriad of options. However, it is much harder to select such a ski without knowing what to look out for before purchasing. You would end up purchasing skis without the appropriate background knowledge needed for selection.

The Ski’s Width:

This quality directly impacts a sled’s performance and handling properties. The wider the ski, the greater the float it gives. This is why snowmobiling experts that love to engage in the mountain ranges prefer to go for skis that are between 8 to 10-inches wide. However, if you wish to stick to trails, you should purchase skis that are between 5 to 6 inches. On a trail, the wider the ski is, the harder it is to make turns. So, you can go for a narrow ski or a wide ski, depending on where you wish to engage the snowmobile skis.

Durability:

Aftermarket skis are generally made of durable polymer materials so they can last for many years, even under strenuous and intense performances. They are lightweight and strong. You can rest assured that you are safe when snowmobiling with these snowmobiling skis because they won’t break down regardless of how you snowmobile with them and they won’t reduce your speed when you want to take a turn on a trail.

Special Designs:

These skis are designed to give you as a snowmobiler a lot of floats while enjoying the process. They are also designed to give you control of the trails while maintaining balance. Depending on where and how you wish to snowmobile, there are a lot of design choices you can select for your sleds.

Affordable:

Despite being built for maximum performance, aftermarket snowmobile skis are affordable for the functions they perform. Some of these skis go for as low as $125. They can fit right into your budget. You can get your custom snowmobile skis at relatively cheap prices.

Visuals:

In terms of visuals, snowmobiling skis come in a variety of colors so you can select your favorite color. They also add a certain custom look to your snowmobiling sled. Therefore, you can have fun snowmobiling in stylish and cool sleds.

Aftermarket Snowmobile Skis Cons

The only con of using these Aftermarket Snowmobile Skis, rather than OEM skis, is the slighter costlier, however, when you take into consideration the differences between the two types, you’ll see they are worth every cent spent on them.

Final Notes:

It is important to take note of the above-mentioned before selecting a pair of Aftermarket Snowmobile Skis. You should choose a pair well suited to your needs to ensure you have lots of fun while snowmobiling.

Aluminum Snowmobile Racing Skis

September 3, 2021 by snowmobiles.org Leave a Comment

Over the years, plastic and steel skis have swiftly moved past other materials due to better lightweight durability and maneuverability. However, aluminum snowmobile racing skis still hold vintage esteem for snowmobile racers. During their early inceptions in the 1960s-70s, an aluminum Dual Ski was launched by Connecticut Design Unlimited International, completely redefining the era’s snowmobiling experience. Successive upgrades by others went on to integrate plastic skins and metal mounts. People would also depend on aftermarket aluminum snowmobile racing skis until industry standard plastic “composite” developments were embraced by the Big Four manufacturers.

Aluminum snowmobile racing skis must be complemented with plastic skins and steel fenders for added protection during trail riding, as they are designed for competitive ice racing endeavors, oval races, and water skipping. People who love vintage snowmobile racing may prefer these skis too. You have to be cautious while snowmobiling on aluminum race skis and ensure regular maintenance as there is an inherent risk of life-threatening accidents if you do not keep them maintained. Although they seem to have vanished from the radar these days, there are still a few online platforms that are selling new and used aluminum snowmobile racing skis.

North Star Racing Skis (SKU: 03-015A)

North Star Racing Skis (SKU: 03-015A) are a relatively affordable option among aluminum snowmobile racing skis from the brand. They are suitable for oval racing and are preferred by many riders who engage in the sport. The skis weigh 16lbs and measure 32 x 8 x 9 inches. North Star Racing Skis (SKU: 03-015A) feature a 20” spring and come fully assembled. Their leaf spring design provides adequate rigidness for withstanding the requisite carbide. They are not drilled, and riders will have to purchase saddles and other required components separately as the same are not included in the package.

North Star Air Racing Skis (SKU: 03-023A)

North Star Air Racing Skis (SKU: 03-023A) are one of the best aluminum snowmobile racing skis available for vintage sleds. Their main highlight is the integrated Fox Float shock that supports the adjustment of compression and rebound. The ski weighs 21lbs and has dimensions of 32 x 8 x 9 inches. Its air pressure can be adjusted from 50 to 300 psi via the 3-position compression adjuster lever. It allows the rider to set the stiffness of the leaf spring as required. A dial is provided for adjusting the rebound and supports twelve different settings. North Star Air Racing Skis (SKU: 03-023A) are not drilled for carbides. The package does include an air pump. Their premium price tag makes them suitable only for enthusiasts.

USI Flat Line Racing Ski

USI Flat Line Racing Ski is a highly recommended option among aluminum snowmobile racing skis. Many participants of sled races have considered it to be a highly dependable option. The ski weighs 9 lbs and measures 45 x 12 x 9 inches. Its bottom features a UHMWPE near friction-free plastic construction and prolongs the life of this aluminum snowmobile racing ski from USI. The Flat Line Racing Ski is suitable for quite a few sled models manufactured by Arctic Cat, Polaris, Ski-Doo, and Yamaha. Although it is no longer in active production, the USI Flat Line Racing Ski can still be found in stock at quite a few stores as well as on the company’s website.

Phil Little Racing Aluminum Skis for Indy and TX

Riders who are searching for aluminum snowmobile racing skis for Indy and TX sleds should consider the offerings from Phil Little Racing. The seller provides IFS skis and Leaf skis for these models. The former weigh 7.5 lbs and are designed for Indys that were produced between 1980 to 1997, while the latter are even lighter at 5lbs and will suit Colts, Chargers, TX, and SS snowmobiles from Polaris. Phil Little Racing Aluminum Skis are suitable for oval racing and water skipping. They come in four different finishes and require runners and carbides to be purchased separately.

USI Super Light Drag Ski

USI Super Light Drag Ski is an alternative from the manufacturer for riders who engage in drag racing. It is a popular choice of many riders who own vintage snowmobiles and participate in drag racing tournaments. The last version of the skis to be produced weighed a meager 1.75lbs, including the weight of the mounting kit. These aluminum snowmobile racing skis featured a high-impact bottom made of UHMWPE near friction-free plastic for maximizing speed. It prolongs the life of the skis by preventing the aluminum from wearing away quickly. USI Super Light Drag Ski is compatible with many snowmobiles from Arctic Cat, Ski-Doo, Polaris, and Yamaha that were popular from around 1980 to 2010. Its production has been discontinued, but it may be in stock with various retailers and the manufacturer.

Aluminum skis for Indy and TX – Aluminum IFS Indy Race skis

Offered by Phil Little Racing, these skis are incredibly lightweight at 7.5 pounds without carbides. You will feel a noticeable drop in your snowmobile’s overall mass. You must enclose them in plastic skins to reinforce their strength and prevent damage during use.

Wahl Brothers Racing Products

Wahl Brothers offers a few different models of aluminum snowmobile racing skis, with each one geared toward a different purpose depending on what you are looking for:

Aluminum Ski Blank, 24”, ea. weighs 1.00 pound and is one of the aluminum models sold by Wahl Bros Racing.
Champ Extruded Skis are aluminum skis and have great compatibility with Woody’s carbides for added protection. 03-070A original Champ versions are 17” length x 3 ¼ ” width and have a half-inch flat groove along with a spindle width of 2”. Wider designs for 03-069A skis also have half-inch flat grooves and 17-inch lengths, but are wider at 3 ½ inches and support 3” spindles. Both types have attached hooks and stainless-steel clips.
Extruded IFS aluminum drag skis weigh 2 pounds each and are 24 inches long. The spindle width is 3 inches.
North Star Raptor Skis are manufactured from race-proven extruded aluminum and stainless-steel mounts with leaf spring supports. They weigh 21 pounds and incorporate Exclusive Raptor shocks of 100% billet components and 5/8″ nitride shaft.
Leaf Spring Drag Skis from Wahl Bros. have been described to be some of the fastest snowmobile drag racing skis. Each ski weighs 4 pounds and the dimensions are 24” length x 4” width.
Wahl Asphalt Skis are made of durable and lightweight aluminum, designed for asphalt racing activities. They come with two or four billet aluminum wheels. The model is approved by NHRA and ISR standards.

Ebay.com

If you are looking for a one of a kind pair of aluminum snowmobile racing skis, sometimes the best place to look is ebay.com. It will be hit and miss, and you will most likely only find one good pair at a time, but you never know what is up for sale on ebay.com at any given time. At the time of this article we were able to discover the following models of aluminum snowmobile racing skis:

Vintage Polaris Aluminum Snowmobile Skis (Model Year 88 89 90 91 and Model Indy 400 500 600 650 RXL)

This second-hand pair from Minnesota, US is available through eBay.com, suitable for Polaris snowmobiles. The skis have been scratched due to prolonged use, but they are durable and have strong carbides.

1820362-067 Polaris 1985-1996 400 440 500 600 650 Optional Aluminum Alloy Ski

These lightweight skis are in brand new condition on eBay.com. All the possible specifications of Polaris snowmobiles that will support this model are mentioned by the seller. They will help you decide if the skis will fit your snowmobile.

Polaris Indy Aluminum Skis

The seller has listed up one aluminum ski to be sold on eBay. This is a used product but still in excellent shape. It is not dented or cracked, and you can restore it to a better finishing with a coat of paint.